These pages contain only a portion of parts available. If you don't see what you're looking for, give us a call at (603) 335-3350 or send us an email info@justchevytrucks.com
1973 NP205 for a TH350 Transmission. This unit uses the old style "Universal Yoke" for the front drive shaft.
1977 NP205 for a SM465 4 speed standard Transmission. This unit uses the newer style "Bolt on Flange" for the front drive shaft.
This is a "Slip Yoke" tail shaft NP205
This is a "Fixed Yoke" tail shaft NP205
1984 & Older NP205 for TH400 Transmission. These use a Tall / "Figure 8" Adapter. Transfer Case Uses ATF or SAE 80-90 Gear Oil depending on use & climate.
1985 & Newer NP205 for TH400 Transmission. These use a Short / Round Adapter.
NP203 "Full Time" 4WD 10K GVW Transfer case. The Big Aluminum cone off the back of this NP203 is a Differential! This actually differentiates front to back! NP203's Are $200.00 to $300.00 Depending on model TH350 or TH400 Fill with SAE 10-30 Engine Oil!
Front of an NP203
NP208 come in 2 styles. 27 Spline Female input collar for TH350's & 700R4's. 32 Spline Female input collar for TH400's & Standard Transmissions
NP208 1981 to 1987 +/- . All of them are Passengers side drop (Front drive shaft), and Cable driven speedometers! Please note the 1 piece rear tail cone!
Starting in 1988 (Pick-ups) and 1989 for Blazers & Suburbans GM made the NP241 their main Transfer Case. This is One very versatile Case! You can identify one by the 2 Piece tail cone (NP208's have a 1 piece cone).
NP241's come in drivers side drop & passengers side drop! They also come in cable driven speedo models or Electric (VSS) speedo!
1997 1 Ton Borg Warner 4401 Transfer case
Borg Warner 4470 Transfer case
An NP243 looks a lot like the NP241 but is electrically shifted A.K.A. "Push Button" 4WD.
NP243 "Push Button" 4WD
Borg Warner 4401Transfer cases. These brutes are found in the 1989 & later 1 Ton trucks
Transfer Case Skid Plate.
NP208 Shifter Complete
NV246 or Options Code NP8 for 1999 & newer trucks
The "Push Button" NV246 1999 & Newer
Adapter Plate NP203 to TH400. See the Black Gasket area with the 6 bolt holes? This is TH400!
Adapter Plate NP203 to TH350.
Adapter Plate 1984 & Older SM465 to NP205 W/ Shifter and 10 Spline Female Collar.
NP205 to TH400 "Short Round" Style adapter mounted on Transfer Case
1985 and Later NP205 to TH400 "Short Round" Style adapter plate W/ Shifter
1984 and Older NP205 to TH400 "Tall Figure 8 " Style adapter plate W/ Shifter.
SM465 to NP205 "Old Style" 10 Spline Mating collar. This is the "Good" end!
1984 and Older NP205 to TH350 "Tall Figure 8 " Style adapter plate W/ Shifter. This has a 27 spline Female mating Collar W/ Carrier Bearing
SM465 to NP205 "Old Style" 10 Spline Mating collar. This is the "Bad" end!
Short Style TH400 to NP208/241 adapter plate
Tall Style TH400 to NP208/241 adapter plate
Short Style TH350 or 700R4 to NP208/241 adapter plate
Tall Style TH350 or 700R4 to NP208/241 adapter plate
Aluminum 4L60 or 700R4 to NP243 adapter plate
Military Blazer Crossmember for "Tall" adapter W/ Skid Plate
SM465 to NP208 Tall adapter plate 1984 & Older
SM465 to NP208 Short adapter plate 1985 & Newer
4WD "W" Crossmember Used in the 1985 to '87 4WD Trucks
4WD "W" or "Double Hump" Crossmember With Skid plate for the Transfer Case. Used in the 1985 to '87 trucks
4WD "Single Hump" Crossmember Used in the 1985 to '87 Style trucks
4WD "Single Hump" Crossmember With Skid plate for the Transfer Case. Used in the 1985 to '87 Style trucks
1/2 & 3/4 Ton "Tall" Adapter style on top. 1 Ton "Tall" Adapter on the bottom
THe "Swoop Down" Crossmember W/ Adapter sitting on it.
1999 and Newer LS Truck NV261 Transfer Case "NP2" Options Code
NV261 Transfer Case "NP2" Options Code
This is the "Swoop Down" Crossmember used in the 1984 & older 4WD Pick-ups
These pages contain only a portion of parts available. If you don't see what you're looking for, give us a call at (603) 335-3350 or send us an email !info@justchevytrucks.com
Your Source for Used Chevy & GMC Truck Parts 1973 & Newer
